If you find underground utilities, you can easily determine what type of utility it is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. People can call 811 to prevent these incidents, before they proceed with digging their property. When the number is called, you can let the utility companies come out and mark their respective lines.
Marking lines may lessen the risks but there are time when accidents still happen. It is said that every 6 minutes, there is a utility line that is struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.
With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.
Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.
White lines are for proposed excavation sites. Area that will be excavated in the future are marked.
Temporary survey markings use pink lines. These are used by surveyors to mark off legal property boundaries.
Electric power lines, cable, conduit, and lighting cable use red lines. This color is appropriate for electrical works since it is associated with fire and danger.
If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.
Communication, alarm, signal lines, cable, or conduit use orange lines. If you see blue lines then these are lines for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. Green lines are used for sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.
You can learn more about the color coding of utility lines if you click here now! View here for more.